Concrete work by Concrete on Demand Idaho in Nampa
4.5/5 · 16 Google reviews

Concrete Slabs in Nampa

Slabs for garages, shops, sheds, hot tubs, RV pads and home additions, level and built for the load.

  • Driveways, patios & walkways
  • Plain, colored & stamped finishes
  • Serving Nampa and Southwest

Concrete

Concrete Slabs with Concrete on Demand Idaho

A slab is the base everything else sits on, so it has to be level, square and strong enough for what goes on top: a shed, a detached garage or shop, a hot tub, an RV or an addition to the house. The thickness, reinforcement and edges are planned around that load.

The site is excavated and a compacted gravel base laid, with a vapor barrier under slabs that will be enclosed. Edges can be thickened to carry walls, anchor bolts set for framing, and the surface finished smooth for a garage or shop floor or broomed for outdoor use.

How it works

From first call to finished job

  1. Step 1

    Share your project

    Driveway, patio, slab or repair: tell us the rough size, the finish you have in mind and your address. Photos of the area help.

  2. Step 2

    Measure and plan

    The area is measured and checked for slope, drainage, access for the concrete truck and any old concrete that has to come out.

  3. Step 3

    A clear quote

    You get a quote that spells out the size, thickness, base, reinforcement, finish and removal of old concrete, so you know what's included.

  4. Step 4

    Prep, pour and cure

    The ground is excavated, the base compacted and the forms set, then the concrete is poured, finished and jointed. You'll know how long to wait before walking or driving on it.

What's included

Concrete Slabs: what we handle

  • Garage and shop floors: Slabs for detached garages, workshops and pole barns, finished smooth and level.
  • Shed and storage pads: Level pads so sheds and storage buildings sit square and stay dry.
  • RV and parking pads: Thicker slabs for RVs, boats and trailers, tied into the driveway where possible.
  • Hot tub pads: Pads sized and reinforced for the weight of a filled hot tub.
  • Vapor barrier and base: A compacted gravel base, plus a vapor barrier under interior slabs to keep ground moisture out.
  • Ready for framing: Thickened edges and anchor bolts set where the walls will go, so framing can follow.

Need concrete slabs?

Tell us about the job and we'll get back to you.

Request a quote

Service area

Serving Nampa and nearby

Concrete on Demand Idaho offers concrete slabs in these communities.

  • Nampa
  • Southwest

Reviews

4.5/5 from 16 Google reviews

4.5

4.5/ 5

Concrete on Demand Idaho

16 Google reviews

Rating and review count as published on Concrete on Demand Idaho's Google profile. See the profile on Google

FAQ

Concrete Slabs: common questions

How thick should a concrete slab be?

Four inches is standard for sheds, patios and light use. Garage floors, RV pads and slabs for heavy equipment are typically 5 to 6 inches or more, with thickened edges where walls or heavy loads sit. Local code and the building plans may set the requirement.

Do I need a permit for a slab?

Slabs for garages, shops and additions are usually part of a building permit, and some cities require permits for large sheds or accessory buildings. A simple pad often doesn't need one. Your city's building department has the final word.

Why does a slab need a vapor barrier?

Concrete lets ground moisture wick up through it. Under a garage, shop or addition, a vapor barrier keeps that moisture from damaging flooring, stored items and anything glued to the slab. Outdoor pads usually don't need one.

Call us

(208) 766-6326

Talk to Concrete on Demand Idaho about your project.