4.5/ 5
Concrete on Demand Idaho
16 Google reviews
4.5/5 · 16 Google reviews
Stamped & Decorative Concrete in Nampa
Stamped patterns, color and exposed aggregate that give concrete the look of stone, slate, brick or wood.
- Driveways, patios & walkways
- Plain, colored & stamped finishes
- Serving Nampa and Southwest
Concrete
Stamped & Decorative Concrete with Concrete on Demand Idaho
Decorative concrete gives you the look of natural stone, slate, brick or even wood planks, poured as one slab. Patterns are pressed into the fresh concrete with stamping mats, and color comes from the mix, a color hardener on the surface and an antiquing release that highlights the texture.
Stamped concrete is used for patios, pool decks, walkways, driveway borders and entryways. It still needs control joints like any concrete, and it should be sealed after it cures and resealed every few years to protect the color. A non-slip additive in the sealer adds grip where the surface gets wet.
How it works
From first call to finished job
- Step 1
Share your project
Driveway, patio, slab or repair: tell us the rough size, the finish you have in mind and your address. Photos of the area help.
- Step 2
Measure and plan
The area is measured and checked for slope, drainage, access for the concrete truck and any old concrete that has to come out.
- Step 3
A clear quote
You get a quote that spells out the size, thickness, base, reinforcement, finish and removal of old concrete, so you know what's included.
- Step 4
Prep, pour and cure
The ground is excavated, the base compacted and the forms set, then the concrete is poured, finished and jointed. You'll know how long to wait before walking or driving on it.
What's included
Stamped & Decorative Concrete: what we handle
- Stamped patterns: Ashlar slate, cobblestone, flagstone, brick and wood-plank patterns, plus seamless textures.
- Color: Integral color, color hardeners and release agents combined for natural-looking, two-tone surfaces.
- Exposed aggregate: The top layer washed off to reveal the stones in the mix, for a textured, grippy finish.
- Borders and accents: Stamped or colored borders that frame a plain driveway, walkway or patio.
- Sealing: Sealer applied after curing to deepen the color and protect the surface, with an anti-slip additive where needed.
- Resealing: Faded or dull stamped concrete cleaned and resealed to bring back the color.
Service area
Serving Nampa and nearby
Concrete on Demand Idaho offers stamped & decorative concrete in these communities.
- Nampa
- Southwest
Reviews
4.5/5 from 16 Google reviews
4.5
Rating and review count as published on Concrete on Demand Idaho's Google profile. See the profile on Google
FAQ
Stamped & Decorative Concrete: common questions
Is stamped concrete slippery?
Sealed stamped concrete can be slippery when wet, especially with smooth patterns. A textured pattern and a non-slip grit mixed into the sealer make a big difference around pools and on steps.
How often does stamped concrete need resealing?
Every two to three years is typical, more often in high-traffic areas or harsh winters. Resealing protects the color from sun fading and keeps water and salts out of the surface.
Does stamped concrete crack?
It can, like any concrete. Control joints are placed within the pattern so cracks follow those lines, and a solid base and proper thickness keep cracking to a minimum. Hairline cracks are usually only cosmetic.
Other services
More from Concrete on Demand Idaho
Concrete Driveways
New driveways, replacements and extensions, built on a solid base for daily traffic.
Concrete Patios
Plain, colored, exposed aggregate or stamped patios for outdoor living, grilling and entertaining.
Sidewalks, Walkways & Steps
Front walks, garden paths, sidewalks and concrete steps that are level, safe to walk and easy on the eye.